Features
X10 EagleEye Motion Detector PIR on sensing movement will send X10 signals by wireless to an X10 receiver which can be set to perform other functions like turning lights or appliances on or off.
- Save energy by turning off lights when there is no-one in the room.
- Have lighting without wall switches.
- Activate lighting sequences.
- Protect your home by having early warning of visitors.
Imagine not having to tell the kids to turn the lights off when they are not in
the room - with the MS13E2 Motion Sensor it can be done automatically! Imagine
not having to search for a light switch in the dark - The MS13E2 can turn on the
lights when someone enters the room. With a CM11 Computer Interface and Harmony
Software, you can set up macros to run when the MS13E senses occupancy or not.
With the CM11 time delay you can have sequenced lighting.
The MS13E2 sends wireless radio frequency (RF) signals to a Transceiver Module.
The receiver then passes the signals onto your house wiring which are picked up by other X10 controlled modules, like the Lamp Module or Appliance Module to turn on lights
or appliances around the home. The MS13E2 can also send signals to turn off
a light after a designated time. The user can set the MS13E to turn off after
1,2,4,8,16,32,64 and 128 minutes, as long as no motion has been detected.
Note that the MS13E2 has a built-in photocell that detects when it is dark.
The user can select to use the photocell to only turn lights on when it is dark.
In this condition the MS13E does not transmit RF during daylight. Alternatively,
the user may choose not to use the photocell and the MS13E will transmit day
and night that there is someone there. In addition, the MS13E sends signals
when it detects dusk and dawn so it can turn a light on when it gets dark and
turn it off when it gets light (in addition to turning lights on when it detects
motion, when its dark).
Specifications
Batteries: 2 x AAA
RF Frequency: 433.92 Mhz
RF Range: 30m (open field)
Field of view of approx 110 degrees on the horizontal
axis and 125 degrees vertically
Output: 1mW
Approvals: 1-ETS 300220, 300683
Ambient Temperature: -10ºC to +50ºC (operation); -20ºC to +70ºC (storage)
Length 65, Width 65, Height 25 mm.
This product is CE approved for use in the EU.
|
