INSTEON DIN Rail Dimmer

Description

The INSTEON DIN Rail Dimmer can be used to control dimmable lighting up to a load of 300w. It can conveniently be mounted in a consumer unit or enclosure on a standard DIN rail. It is controllable locally using a momentary or latching switch and remotely using an Insteon or X10 controller.

Features

• Ideal for the professional installer enabling you to place the units all in one cabinet
• You can use a switch design to match your taste, either latching, single momentary or double momentary
• Programmable on-level and fade on/off speed
• Controllable locally by switch or remotely by Insteon or X10

Technical Spec.

• Load brightness levels: 32 locally (256 with software)
• Local ramp rate: Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)
• Software configurable
• X10 support using Any 1 of 256 (unassigned by default) X10 addresses
• Max. load: 300W at 240VAC
• Minimum load: None
• Standby power consumption: <1W

More Info:

Click here for the Quick Start Guide

Click here for the Full Manual