UK Automation
Call us on 0845 094 0089
  Top » Catalogue » X10 Home Automation » X10 Plug in Modules » TM13U Welcome to UK Automation - Would you like to log in?
30 Day Money Back Guarantee on all purchases

Marmitek X10 Transceiver Module - All House Version
[TM13U]

 £19.44 
(£16.54 ex. VAT)

Overview

Availability:
In stock ready to dispatch
Like this item? Share it!

Bookmark and Share

Features

  • Converts radio signals from Remote Controls, Wireless Switches and Wireless Sensors to X-10 Powerline signals over the mains.
  • Comes with a built-in Appliance Module (220V, 5A).
  • Status reading with CM11 Computer interface

Details

Availability:
In stock ready to dispatch
Like this item? Share it!

Bookmark and Share

Applications

The Marmitek TM13 Transceiver Module is the central receiver necessary when using Remote Controls, Wireless Switches and Wireless Sensors. The TM13 Transceiver converts the signals from these devices to the X-10 Protocol on the mains, so that all X-10 Modules can be controlled via the mains.

The Transceiver Module contains a selector switch for the House Code. The HouseCode of the TM13, the modules and remote controls have to be set to the same letter code to be able to control up to 16 X-10 modules.

Position “P” will transmit all house codes

The built-in Appliance Module can be switched with a command via a wireless controller, such as a Handheld Remote Control, or via the mains using the X-10 protocol. The built-in Appliance Module always responds to Unit Code 1.When the Transceiver Module is combined with the CM11 Computer interface, the TM13 functions as a ‘gateway’ to transmit signals from remote controls and other devices to the CM11.

Using the TM13, any macros stored in the CM11 Computer Interface can be activated using a wireless remote control and all X-10 addresses can be controlled (max. 256 modules).
The Transceiver Module has a plug and switched socket and can be connected without extra wiring.

Reading the status of the TM13 is possible with the use of the CM11 Computer Interface.


Specification

Availability:
In stock ready to dispatch
Like this item? Share it!

Bookmark and Share

Technical Specifications

Power: 230V +10% -15%, 50Hz
Supply current: <20mA capacitive
Switching capacity:
#300W/230V for light bulbs
#Low-voltage halogen lamps with a 500W/230V transformer for inductive / capacitive loads
#1200 W/230V for linear loads
RF Receiver Frequency: 433.92MHz
Marmitek X-10 Power Line: 120kHz +/-2kHz, 3.5Vpp
Signal Sensitivity: 15mVpp min., 50mVpp max. at 120kHz
Input Impedance: >180_ (L-N) at f=120kHz
Ambient Temperature: 0°C to 50°C (operating), -20°C to 70°C (storage)
Dimensions: 52x122x33mm (wxhxl excl. plug)

This product is CE approved for use in the EU.


Reviews

Darren Williams - 30/03/2010 

Simple, straightforward and easy. Plug it in, set the house code, and you can switch via X10.... does what it says. Range is a little limited in the older thick brick houses but providing you locate within 10m or so of the switch then it works.

Bernard Jamieson - 27/03/2010 

Goods were as described and in perfect working order. Great Service

stacy conroy - 04/05/2007 

This module is very good, if using within the home, it has given us both freedom and instant results when we wnat it most. however, if you ahve got garden lights, it can be frustrating for the signal to reach the receiving module, due to the length of wiring on the mains, so we have purchased another tranceiver module and placed this in the garden Now all is well. This system is very reliable and not very expensive.

Click to view All Reviews

Customer reviews

  • Darren Williams - Submitted on: 30/03/2010

    Simple, straightforward and easy. Plug it in, set the house code, and you can switch via X10.... does what it says. Range is a little limited in the older thick brick houses but providing you locate within 10m or so of the switch then it works.

  • Bernard Jamieson - Submitted on: 27/03/2010

    Goods were as described and in perfect working order. Great Service

  • stacy conroy - Submitted on: 04/05/2007

    This module is very good, if using within the home, it has given us both freedom and instant results when we wnat it most. however, if you ahve got garden lights, it can be frustrating for the signal to reach the receiving module, due to the length of wiring on the mains, so we have purchased another tranceiver module and placed this in the garden Now all is well. This system is very reliable and not very expensive.

Click to view All Reviews

For more information, please visit this products webpage.
If you have any questions about this product, you can either:
Post a message on the forum
Or click here to email us about this product
Price:  £19.44  inc. VAT
Availability:  In stock ready to dispatch
Quantity: 
Reviews

Marmitek X10 Wireless Wall Switch
£22.77
TEXT_BUYMarmitek X10 Wireless Wall SwitchTEXT_NOW

Marmitek X10 Key Chain Remote Control
£12.52
TEXT_BUYMarmitek X10 Key Chain Remote ControlTEXT_NOW

X10 Single Button Wireless Wall Switch

White momentary switch

Momentary / Retractive Switches

Marmitek X10 Lamp Module & Dimmer with Transmitter LWM1

Marmitek HomeGuard Security System with Phone Dialler

Green-i Single Gang PIR Dimmer Switch

My Basket
0 items
My Account
Log In
Manufacturer
Other products

Follow us on Twitter for the latest news and special 'Twitter Only' offers!




Card payments via SagePay  PayPal  Visa Mastercard Delta Maestro Solo Electron Verified by Visa Mastercard Secure