Site Information

 Loading... Please wait...
  • Image 1

Marmitek X10 Lamp Micro Module and Dimmer with Transmitter LWM1P

Current Stock:

Product Description


  • Local control via the switch attached to the module or remote control using Marmitek X-10.
  • Built-in dimmer, 120W.
  • Two-way X-10: transmits the set dimmer level to other LWM1P, LD11, LW12 and LW11 modules (set to the same HouseCode and UnitCode).
  • Softstart and softdim.
  • Memory function for last dimmer setting.
  • Responds to ON, OFF, DIM, BRIGHT and extended X-10(dimmer setting originates from other LWM1P modules).
  • Can respond to All Lights On and All Off (configuration).
  • Choice between 1-way momentary switch or 2-way momentary switch. Needs a momentary switch for manual control Click here for momentary switches

For further information about Marmitek Micro Modules click on Marmitek comparison table



Power: 230V - 50Hz.
Capacity: 250W/230V with temperature and mounting restrictions. 120W/230V light bulbs. 100W Low voltage halogen lighting with wound voltage transformer. 120W Low voltage halogen lighting with electronic voltage transformer. (recommended voltage transformer: Osram HTM series. If you use other voltage transformers, we advise you to test the combination before building in the system). Softstart/Softdim. Memory reading for dim level
X-10 Key codes: All units Off, All Lights On, On, Off, Dim, Bright, Extended Code 1 type 3, Pre-Set Dim, Status Request.
X-10 transmisson: 1 pulse on 0° and 180°.
Switch use: 1 or 2 way momentary switch.
Connection reach: Till 2.5 mm2
Fuse: Radial lead micro fuse, 1.6AT, 250V.
Environment temperature: -10°C to +35°C (operation) -20°C to +70°C (storage).
Dimensions: 46x46x16mm.

How to install

To see full details of how to install and program this module download the manual:

A manual for this product is available:

pdf Click here to read the LWM1P manual - 450Kb

Find Similar Products by Category