These Micro Modules are dsigned to be concealed in existing switches or wall sockets, transforming a standard wall socket into an X10 controlled socket. They can be used with any brand of switch and are completely invisible in your home. Please refer to the comparison table below, to help you decide which units are most suitable for your needs.

Characteristic
AWM2
LWM1
TMA4
TMD4
AW12
X10 Communication Two Way Two Way Two Way Two Way One Way
Switching Principle / Load

Relays

16A Ohm

2200W lamp

3A inductive/capacitive

Dimmer

250W lamp

200W low voltage halogen lamp

Softstart/Softdim

Memory for dim level

 N/A N/A

Relays

16A Ohm

2000W lamp

3A inductive/capacitive
Built-in dimmer No Yes N/A N/A No
X10 Commands received

On/Off

All Lights On

All Off

On/Off

All Lights On

All Off

On/Off

All Lights On

All Off

On/Off

All Lights On

All Off

On/Off

All Lights On

All Off
X10 Commands Transmitted On/Off On/Off/Dim/Bright/Dim Level On/Off On/Off/Dim/Bright N/A
Load can be attached directly to module Yes Yes No No Yes
Silent relays Yes N/A N/A N/A No
Use in 3 phase installation Yes N/A N/A N/A No
Number of X10 input/output 2 1 4 4 1
Attachable switches Switches or momentary switches Momentary switches Switches Momentary switches Switches or momentary switches
Input switches to: Neutral Neutral Neutral Neutral Phase 230V
Dimensions 4.6cm x 4.6 cm x 1.6cm 4.6cm x 4.6 cm x 1.6cm 4.6cm x 4.6 cm x 1.6cm 4.6cm x 4.6 cm x 1.6cm 4.6cm x 4.6 cm x 1.7cm
LED display power /programming mode Yes Yes Yes Yes No
Power 230V / 50Hz 230V / 50Hz 230V / 50Hz 230V / 50Hz 230V / 50Hz
Power consumption <30mA <30mA <30mA <30mA <20mA
Description Appliance Wall Module for 2 addresses Lamp Wall Module for 1 address Transmitter Module Appliance for 4 addresses Transmitter Module Dimmers for 4 addresses Aplliance Wall Modules for 1 address