Loading... Please wait...

Our Newsletter

Reviews of uk-automation.co.uk
 
 
 
 
 

Marmitek X10 SC9000 Telephone Dialler with Digimax Support

  • Marmitek X10 SC9000 Telephone Dialler with Digimax Support
Price:
£71.14
SKU:
SC9000
Brand:
Shipping:
Calculated at checkout
Quantity:
Bookmark and Share


Product Description

Features

Wireless security system - with built-in voice dialler and X10 controller

  • Enhanced security with:
    - Tamper supervision of all security devices
  • Enhanced convenience with:
    - ARM/DISARM by telephone, built-in keypad or remote control
    - 2 security messages - alarm and system fault
  • Enhanced ease of installation:
    - Allocate detectors to your choice of zones
    - PABX compatible telephone dialler
    - Telephone numbers stored in E2
  • X10 controller which allows you to control your X10 devices remotely by phone.

Description

The Voice Dialler Security kit is a fully supervised system that gives you the power to protect your home whether you are at home or away. This kit is easily installed (no wires) and allows you to control the level of security at all times.

In protecting your home, your first requirement is to make sure that the burglar doesn't choose your home. The SC9000 Security System has built-in "prevention features" that make a house look lived-in. Sound via X10 plug-in modules to a radio and/or lights can be turned on any time, whether you are at home or away.

Making your home looked lived-in will dissuade most potential burglars; if, however, the burglar is determined to enter your home, the SC9000 Security System using X10 external motion sensors it can trigger more sound, bark the electronic dog and turn on lights as the burglar approaches the house using the appropriate optional X10 devices

In the event that the burglar does break-in, the second requirement is to get him/her out of your house as quickly as possible. If a window or door sensor or motion detector is activated, sirens of 95 dBs will sound and make your house physically uncomfortable for the burglar thus forcing him/her to leave as quickly as possible. A voice dialler system will immediately call a friend or neighbor, playing your pre-recorded message indicating that there is a problem at your residence. A listen-in feature allows the friend or neighbor to hear what is going on inside the home and take appropriate action.

The SC9000 also has the very useful ability of allowing you to control your X10 devices remotely by simply dialing in and then using keystrokes to turn on/off items as required. This can be used to switch lights, appliances or to switch your heating on before you get home.

In protecting yourself, your home and your loved ones, the voice dialler security kit makes life more secure and more relaxed.

A manual is available for the SC9000

pdf2.gif SC9000 manual - Note: the manual is the same as the Safeguard system

The SC9000 can also be controlled using an EasyTouchPanel10 - see this article for details.

Technical Data

  • CE Mark
  • TBR21 approved dialler
  • 433.92 RF operating frequency.
  • 230V 50 Hz supply. 4xAA back up battery -24 hours stand-by time
  • Integral 95 dB siren
  • Monitors up to 30 sensors (door/window, motion detector and/or glass
  • break sensors), 2 hard-wired input and 16 remote comtrols
  • 6 Telephone numbers stored in non-volatile memory, 16 digits each
  • Key pad control for 16 zones or macros
  • Dimensions: L220mm -W140mm -H40mm

Write your own product review

Product Reviews

  1. Marmitek X10 SC9000 Telephone Dialler with Digimax Support

    Posted by William Donaldson on 10th Oct 2009

    Bought this so I can switch off and on devices attached to the appliance module that work with this. Dead easy to set up and am able to switch off devices by a phone call. Great when you want to reset your broadband modem remotely should it require resetting. My only dissapointment is that it works by sending signal down the house electrics and not wirelessly. Great if all your devices are on the same ring main but if you have devices plugged into extension leads then the signal does not get to them. Overall though well worth the money

    #UK Automation comment: The X10 signal should go through extension leads without any problem.


  2. Marmitek X10 SC9000 Telephone Dialler with Digimax Support

    Posted by David Hughes on 23rd Feb 2008

    “What is the most cost effective solution which would allow me to use a telephone line to switch appliances on and off in a remote location”

    I bought this controller (together with a Marmitek appliance module) primarily for home automation in a holiday home. Coincidentally I bought a (much more expensive) alarm panel for my own home at the same time, so I have had the chance to compare the two.

    The SC9000 is neat and compact and it took just a few minutes to get it up and running. In particular I thought that the instructions were clear, and the programming menu structure simple and logical. The SC9000 cannot be programmed to carry out some of the more complex functions of my other panel, but it covers the basics well, and is much more straightforward.

    So now I have the ability to remotely turn the heating on and off in the holiday home, using simple codes and a touch-tone phone. I am now also quite confident of my ability to expand the system to provide further automation and security functionality using the available sensors and sirens.



Why buy from us?

Great customer service

Telephone support during office hours, and email support quite often out of hours too!

30 day money back guarantee

All products are covered by our 30 day money back guarantee. If you're not happy, return the goods to us in the condition you received them for a full refund.

Free 'super saver' delivery

Not in a hurry? Our super saver delivery option gives you free delivery within 5 - 7 days (although many customers receive their items much quicker!)

Add to Wish List

Click the button below to add the Marmitek X10 SC9000 Telephone Dialler with Digimax Support to your wish list.