X10 2 Button Wall Dimmer Switch
- Provides on/off and dimming control – to allow you to set your lighting how you want it manually or automatically
- No Neutral connection required - for easy installation
- Returns to the same state it was in when switched off e.g. if you have dimmed your lights to say 50% and then switch them off, when you switch them on again they will come on at 50% brightness.
- “SLIMTONE” switch panels and soft touch buttons – for a stylish look and sensitive control
- LED backlight – for manual operation at night time
- “Codes Set Electronically” are very convenient and function in only 6 seconds.
- Respond to “All Lights On/All Units OFF, Bright / Dim” command.
- Signal driver (100mV).
- Compatible with any X10 controller.
- Rated Voltage: 230VAC±10%,50Hz
- Lamp Load: 400W Max for standard bulbs (total combined load) or 300W Max. on transformed LV halogens
- Minimum Load: 40w
- Static State Wastage: <1W
- Suitable Temperature: -10-50deg. C