Overview
When used in conjunction with X10 Remote Control or EagleEye Motion Detector, the RF Receiver converts signals from these devices to the X-10 Protocol on the mains. All connected X-10 Modules can then be controlled via the mains.
When used in conjunction with a PC controller the RF Receiver can also activate macros.
The receiver also includes a built-in Appliance Switch (up to 800W and only controllable by RF). The module’s “Plug and Play” set up means it is incredibly simple to use and program.
This receiver is compatible with all X10 protocol products
Technical Information
Fully X10 compatible & Domia X10 compatible
Power: 800W (Appliance only)
Supply Voltage: 230V +/- 10% 50Hz
Ambient Temperature: -10c to +50c
RF Frequency: 433.92 MHz
Transmitting Intensity: 5uV 92dB
Dimensions: 110mm x 60mm x 35mm
|
