Dual Button Touch Sensitive Z-Wave Wall Switch

A designer Z-Wave wall switch without the designer price tag!

This neat touch sensitive wall switch can switch 2 loads, with a maximum rating of 16A total, meaning it can be used to switch lighting, heaters or almost any mains powered device. It has an attractive white and clear plastic front which looks like a glass style switch. The circular areas on the switch controls the relays, just touch the switch and it will switch the load on or off.

As standard, the LED circles on the switch are lit up blue when the connected device is off and red when the device is on. These lights can be controlled via Z-Wave parameters, meaning you can choose to either have no lighting when the switch is off, no lighting when the switch is on, or no lighting at either switch state.

The switch also features a memory function, enabled as standard, which will return the switch to it's most recent operating mode in the event of a power cut.

We've tested the switch with a Fibaro Home Center 2 and it includes easily as a switch device, and when the switch is controlled from the faceplate the status is correctly updated in the Fibaro UI. Due to it's standard device classes, this switch should work seamlessly with all major Z-Wave controllers that support multi-channel associations (Vera, Domoticz, etc). 

Also available as a single button switch.

Technical Specification

Z-Wave Plus radio
Range: up to 50m outside, 30m indoor
Operating mode: touch-sensitive
Switch output: 2 channels - 16A maximum load
Power Specification:110-230V AC+/-10%,50/60Hz
Operating temperature: 0-40℃
Storage temperature: -20-60℃
Power consumption: 1.2W AC
Product size(D*W*H): 86x 86 x 34.2mm