UK Automation
Call us on 0845 094 0089
  Top » Catalogue » X10 Home Automation » X10 Inline Modules » LW12 Welcome to UK Automation - Would you like to log in?
Free shipping on all orders over 200
30 Day Money Back Guarantee on all purchases

Marmitek X10 Two Wire Micro Module with Dimmer LW12
[LW12]

 31.39 
(£27.3 ex. VAT)

Features

Availability:
In stock ready to dispatch
Like this item? Share it!

Bookmark and Share

This Marmitek MicroModule can be installed behind a momentary type wall switch or into wall outlet because of its extremely small size 46x46x17mm (Minimum built-in depth 40 mm, advised 50 mm). The MicroModule is also ideal for installation into light fixtures or for use in areas with limited space such as rooms with lowered ceilings. and gives you the following benefits:

  • Two wire - no neutral required
  • Full X10 Control - Works with your existing X10 system
  • Dimmer for controlling 230V light bulbs, 230V halogen lamps and low-voltage halogen lamps with transformers ranging from 60 to 250 watts/230 volts.
  • Activated using a momentary action switch or using X10 PLC signals - use designer wall switches to make your own high-specification LW10!
  • It can be operated using the following Marmitek X-10 signals: ON, Off, DIM, BRIGHT and the optional Marmitek X-10 commands All Lights On/All Lights Off/All Units Off if these are programmed
  • Soft-start and dim and bright
  • Remembers it's last dim setting
  • Needs a momentary switch for manual control Click here for momentary switches

For further information about Marmitek Micro Modules click on Marmitek comparison table


How to install

Availability:
In stock ready to dispatch
Like this item? Share it!

Bookmark and Share
  • Switch off appropriate mains fuse and master switch!
  • Where present, take the wall switch out of the wall box.
  • Disconnect all wires from the switch.
  • Connect the live (brown) and load wire (black) to the terminals of the LW12 as described in figure A.
  • Replace your normal make/break contact switch by a momentary switch.
  • Connect a load wire (brown) to the momentary switch (CAUTION: In the interest of safety and to make the device work properly, this load wire HAS TO be from the same group).
  • Connect a black wire to the output of the switch. Connect the other end of this black wire
  • to the input K of the LW12 MicroModule. See figure A.
  • Place the module against the back of the wall box and replace the switch inside the box.
  • Switch on mains fuse and master switch.

An Installation Guide for this product is available:

pdf Click here to read the Two Wire Dimmer Module installation guide - 165Kb


Reviews

There are currently no reviews for this product.
Why not be the first to write one?

Customer reviews

There are currently no reviews for this product.
Why not be the first to write one?
If you have any questions about this product, please click here
Price:  31.39  inc. VAT
Availability:  In stock ready to dispatch
Quantity: 
Reviews

CR2032 Lithium Battery

X10 Wall Switch Appliance Module

Momentary / Retractive Switches

Marmitek X10 DIN Rail Filter/Coupler

X10 Infra-Red Transmitter

360 PIR Light Switch
My Basket
0 items
My Account
Log In
Manufacturer
Other products
Secure Site
UK Automation is fully secured by GeoTrust QuickSSL
Card payments via SagePay  PayPal  Visa Mastercard Delta Maestro Solo Electron Verified by Visa Mastercard Secure