POPP Keypad - Z-Wave External Keypad
The Keypad is the first Z-Wave enabled and outdoor Keypad in the Smart Home world!
The Keypad can activate and deactivate your security system by using an individual PIN Code. Furthermore you can unlock connected doorlocks without a key but with a multi-digit code.
As soon as somebody logs in with their PIN Code you can set-up your Z-Wave controller to inform you via push message, e-mail or SMS (Depending on your controller's messaging functionality)
The POPP Keypad can save up to 20 different PIN Codes. Each Code can have 4-10 digits. Every single PIN code has its own scene ID and can start other scenes. Meanwhile you can also us the different scenes IDs to see, who and when one of the residents came home. Additionally the Keypad has an separate doorbell button, which controls it's own scene. That way you can switch on a light and turn down the volume of your hi-fi system when somebody rings the door.
The Keypad is protected against tamper and burglars as the Keypad has an integrated magnetic sensor. If the Keypad is moved, you receive a push message (gateway mode) immediately or a siren will be triggered. In addition a separate scene ID is used when a wrong PIN Code is entered. As a result you can know when someone has attempted to break in or has mis-keyed their PIN.
An integrated multi-colour LED shows if the Pin Code was entered correctly and informs the user if the entered code was transmitted successfully to the controller.
Stand alone and Gateway mode
The Keypad can be used in 2 different modes. Firstly it can be use in connection to a door lock or door opener in the Stand-Alone mode. For that you do not need a Z-Wave gateway because the Keypad is directly associated with the door opener.
Secondly the Keypad can be used in Gateway mode. In this mode the keypad is connected to the Gateway and is shown as a scene controller. Each access code gets it's own scene ID. The doorbell button and the wrongly entered codes will also be shown with their own scene IDs.
- Keypad with PIN code entering for entrance control
- 20 different PIN codes programmable
- Supports PIN codes with 4 to 10 digits
- Aluminium casing
- For outdoor use and installation (IP44)
- Colorful status LED and acoustical feedback
- Integrated doorbell button
- PIN Codes can be used to trigger different scenes on Z-Wave controller
- Wireless technology: Z-Wave Plus EU frequency 868,42 Mhz
- Power Supply: 4x AAA batteries or 12V power adapter (not included)
What's in the box?
- 1x Keypad
- 4x AAA batteries
- 1x adhesive strip for wall mounting