Z Wave Two Load Appliance Micro Module - Flush 2 Relays - by Qubino

This module requires a Live and Neutral supply.

Features

• Switch 2 resistive loads up to 920W each
• Power reporting in watts
• Small size to fit behind an existing switch
• Low power consumption
• Can operate and control AC (110V - 230VAC) or DC (24 - 30VDC)

Tiny device - big features

The Qubino Flush 2 Relays module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy monitoring as standard

The Qubino Flush 2 Relays module can measure the power consumption of both switched loads separately and itself has an extremely low power consumption of less than 0.4 W.

Flexible and powerful

The Qubino Flush 2 Relays module can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of an additional digital temperature sensor, allowing you to add thermostatic monitoring/switching without having to buy any additional devices. Every module also act as a repeater in order to improve the range and stability of your Z-Wave network.

Super simple installation

The extremely small module size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

• Remove the switches from the box and disconnect the wires.
• Connect the wires to the Qubino module and insert it in the box.
• Fix the switches to the box.

Qubino's fantastic tech support as standard

We know that when you need information you need it quickly. That is why Qubino offer a live customer service helpline, where you can get instant answers to all your questions and best of all, it's absolutely free. 

Exacting quality, as standard

Qubino modules are "install-and-forget" products. Their products are made to last, so they only select and use top-quality electronic components. Their modules are also the most tested Z-Wave micro-controllers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Example use of Flush 2 Relays:

Technical specifications:

* In the case of loads other than resistive, pay attention to the value of cosφ and if necessary use a load lower than the rated load. Max current for cosφ = 0.4 is 2 A at 250 VAC, 3 A at 24 VDC.