The Marmitek appliance module is a receiver unit that works as a remote controlled switch or relay. You can plug it into any plug socket in the house and control the unit attached to it via X10 commands.
The appliance module can switch incandescent lamps up to 500W, appliances with electric motors up to 230W.
As the X-10 switch is simply inserted into wall sockets like an ordinary plug, there is no installation to be carried out. Just set the wheels on the front to the desired device address (eg. G7) and note this address down.
The load connected to the switch module can still be controlled locally by its own switch, but dont forget to leave the local switch in the "ON" position, as otherwise the load cannot be controlled by an X-10 controller. Switch the load off by remote control. The unit responds to "standard" X-10 commands. ie. All-Units-Off, On and Off.
Dimensions: Length 122, Width 52, Height 44 mm
This product is CE approved for use in the EU
Supply voltage: 230V +-10% 50HzSupply current: =< 20mA capacitive 500W (incandescent lamps and halogen light) 230W (motors) 3600W (resistive loads) Responds to X-10 Key codes: All Units Off, On, Off Signal sensitivity: 15mVpp min 50mVpp max at 120KHzInput impedance: => 180Ohms (L-N) at 120KHz This product is CE approved for use in the EU Ambient temperature: -10C to +40C (operation), -20C to +70C (storage)
Gary Leach - 29/11/2006
Does exactly what is says on the tin. Easy to use product. I'm currently using this in conjunction with a MT12 mini-timer to act as a timer for our boiler. The boiler is located in a garage with a standard plug in timer controlling it. Not very useful if you happen to be in when the timer switches to off, it meant a trip to open the garage and change the timer. X10 solved this problem with no wiring.
