UK Automation Retail Ltd: New Products - XanuraHome X10 Pro

Marmitek XanuraHome AFX2 Plugin Filter

Wed, 01 Dec 2010 20:56:23 +0000

Description

Can be used to prevent interference to X-10 signals caused by electrical 'noisy' appliances that have a dampening effect on the network signals.
Install the appliance filter between the consumer plug and wall socket.

Some appliances can ..

Price: £71.44

Marmitek Xanurahome ABX1 Universal remote control

Fri, 25 Dec 2009 09:13:44 +0000

Description of the Marmitek Xanurahome ABX1 Universal remote control

One universal remote control unit to operate lighting and equipment. The RF signals (radio frequency) that penetrate walls and floors effortlessly operate your X-10 applications whilst other devices such as TV and au..

Price: £50.00

Marmitek Xanurahome PMIX35 Programming and measuring interface

Thu, 24 Sep 2009 12:32:52 +0000

Description

The PMIX35 is an indispensable tool for the proficient installation of Marmitek X-10. The programming unit can be used to measure the strength of the signal and noise levels. This makes it possible to examine the lighting circuit, isolate any disturbances with a filter and..

Price: £224.63

Marmitek Xanura Home CTX35 data-interface

Thu, 24 Sep 2009 12:25:47 +0000

Description

The Marmitek X-10 communication transceiver CTX35 is a power line carrier transceiver with 9600bps/19.2Kbps serial data communications. A building automation system or other IBM compatible PCs can use the CTX35 to monitor and control Marmitek X-10 or other X-10 compatible ..

Price: £204.20

Marmitek Xanurahome SAX35 Potential free actuator/interface

Tue, 22 Sep 2009 21:54:05 +0000

Description

The SAX35 is a potential free actuator/interface in a surface-mounted housing. The SAX35 can be used to switch appliances of other manufacturers on the basis of an input contact (max. 5A, 30 V a.c./d.c.). Examples include: a doorbell, electronic lock or heating systems (24..

Price: £195.60

Marmitek XanuraHome FKX40 Phase Coupler/Repeater

Wed, 16 Sep 2009 22:04:05 +0000

Description

The phase coupler/repeater receives Marmitek X-10 commands and forwards these commands to all phases. All commands are repeated when passing the phase coupler.

The phase coupler must be connected to a 16 A 3-phase group

An Installation Guide for thi..

Price: £308.98

Marmitek XanuraHome RFIX35 RF interface with RF-secured function

Mon, 14 Sep 2009 12:35:30 +0000

Description of the XanuraHome RFIX35 RF receiver

The RF interface is a receiver that converts RF signals originating from the Marmitek X-10 or XanuraHome remote control units into Marmitek X-10 commands and subsequently sends them over your property's electrical circuit. The RFIX35 ma..
Price: £123.53

Marmitek XanuraHome SVX10 Signal repeater Micro Module

Sun, 13 Sep 2009 20:44:34 +0000

Description

The SVX10 is a signal repeater that forwards reinforced signals in single-phase systems or additional to the FKX40 in a three phase system. The SVX10 is installed in a junction box.

Repeats all Marmitek X-10 commands

Can be used in single phase in..
Price: £61.22

Marmitek XanuraHome IMX10 Multi-function interface

Fri, 11 Sep 2009 01:07:43 +0000

Features

The IMX10 is a multi-function interface module equipped with four potential free inputs. This module must be installed in junction boxes and can be connected to switches or retractive switches. Application of the IMX10 makes it possible to operate lighting circuits (or applia..
Price: £65.95

Marmitek XanuraHome ZAX12 Sun blind actuator

Fri, 11 Sep 2009 00:54:39 +0000

Features

The ZAX12 is a sun blind actuator with interface equipped with 230 V inputs. It can be used for easy automation of electrically operated sun blinds, roll-down shutters, curtains and screens based on 230 V motors. As a result, these applications can be operated remotely as wel..
Price: £98.35