UK Automation
  Top » Catalogue » Appliance Control » X10 Range » Timers » MT10Silver Welcome to UK Automation - Would you like to log in?
Free shipping on all orders over £200

X10 Marmitek Bedroom Controller - Silver

QTY1+ 2+ 5+ 10+ 20+ 
Price ea.£24.68£23.93£23.44£22.21£21.96


  • Control lights and equipment from your bedroom
  • Handy for when going to bed
  • Wake up to sound, the lights turned on and the smell of fresh coffee
  • Timer for 4 separate modules
  • Now in a silver design!

Extensive timer with the possibility to control Marmitek X-10 modules from a distance by hand or automatically. Ideal for presence simulation: It seems like you are home. Switch 4 different modules per day. With one push on the button all lights will go on or off. With a built-in alarm clock.


Place a 9V block battery in the battery compartment on the underside of the timer. Plug the adapter into a wall socket. Set the HouseCode (A…P) by turning the dial on top of the unit using a screwdriver or coin.
N.B. If the battery is empty, the LED text “battery low” will light up


Set the mode selector [1] to “SET CLOCK”. Set the time by pressing the


Marmitek X-10 modules can be manually controlled by pressing the 1-5, 2-6, 3-7 and 4-8 buttons. Depending on the setting of the selector 1-4 <> 5-8, the ON/OFF buttons control modules 1 through 4 OR 5 through 8. Press the ON side of a button to activate a module. Press the OFF side of a button to deactivate a module. To dim a lamp connected to a Lamp Module, you must first press the ON side of the button with the same UnitCode as the module and then “Bright <> Dim”.


Question: My device modules do not respond to the button ‘All Lights On’. Answer: This is perfectly normal. Only lamp modules will respond to the command ‘All Lights On.’ This is to ensure that in case of an alarm the coffee machine etc. are not switched on. The device modules do respond to the command ‘All Units Off’.

Question: My MiniTimer switches the wrong units.
Answer: Is the switch (1 ..4 / 5 .. 8] set to the wrong setting?

Question: The ‘battery low’ light is on.
Answer: The 9V backup battery in the MT10 is empty or absent.

Technical data

Power: 230V +10% -15 %, 50 Hz
Backup battery: 9 V block battery
Minimum backup power: 6 V DC
Low battery indicator: 7,5 V +/- 0,5 V DC
Dimensions: 55 x 150 x 110 mm
Weight: 590 g
Colour: Silver

If you have any questions about this product, please click here
My Basket
0 items
My Account
Log In
E-Mail This!
Enter an email address to send them details of this product
Secure Site
UK Automation is fully secured by GeoTrust QuickSSL
Card payments via Protx Visa Mastercard Delta Maestro Switch Solo Electron