Marmitek X10 Offer
[MARMITEK OFFER]

Buy 3 Marmitek Lamp or Appliance Modules and get a FREE Transceiver Module

Buy either 3 x Marmitek Appliance Modules:-

The appliance module can switch incandescent lamps up to 500W, appliances with electric motors up to 230W.

As the X-10 switch is simply inserted into wall sockets like an ordinary plug, there is no installation to be carried out. Just set the wheels on the front to the desired device address (eg. G7) and note this address down.

The load connected to the switch module can still be controlled locally by its own switch, but dont forget to leave the local switch in the "ON" position, as otherwise the load cannot be controlled by an X-10 controller. Switch the load off by remote control. The unit responds to "standard" X-10 commands. ie. All-Units-Off, On and Off.

or 3 x Marmitek Lamp Modules;-

• The X10 Lamp Module (LM12U) provides On/Off and dimming control of incandescent lighting.
• Designed to operate with 230V AC 40W to 300W incandescent lamps

The X10 lamp module (LM12U) is a 300W receiver unit that can work as a remote dimmer. The connected lamp can still be switched on and off locally. The dimmer function, however, requires an X10 remote control like the KR22E Keyfob Remote. The dimmer module can be used at any wall sockets in the house with incandescent lamps between 40W and 300W.

Please note that the Lamp Module is only for use with lamps and is not suitable for appliances or Energy saving bulbs.

Get 1 Marmitek Transceiver Module FREE

The Marmitek TM13 Transceiver Module is the central receiver necessary when using Remote Controls, Wireless Switches and Wireless Sensors. The TM13 Transceiver converts the signals from these devices to the X-10 Protocol on the mains, so that all X-10 Modules can be controlled via the mains.

The Transceiver Module contains a selector switch for the House Code. The HouseCode of the TM13, the modules and remote controls have to be set to the same letter code to be able to control up to 16 X-10 modules.