UK Automation
Call us on 0845 094 0089
  Top » Catalogue » X10 Home Automation » X10 DIN Rail Mounted » LD11 Welcome to UK Automation - Would you like to log in?
Free shipping on all orders over 200
30 Day Money Back Guarantee on all purchases

Marmitek X10 DIN Rail Dimmer
[LD11]

 25.52 
(£22.19 ex. VAT)

Features

Availability:
In stock ready to dispatch
  • Installs at the breaker panel/fuse box for X10 control of branch lighting circuits rated up to 700W.
  • Controlled via X10 controllers or momentary action wall switches, including "designer" wall switches.
  • Designed to operate with 230V lighting including mains halogen.
  • Remembers its light level for smooth dimming.

The Marmitek DIN rail dimmer is a 700W receiver unit that works as a remote dimmer. Mounted on the "Top Hat" DIN rail in the mains distribution box, it dims or switches hardwired circuits with several wall switches (eg. Living room lighting). It is designed to operate with 230V lighting including mains halogen.

The unit can be turned on/off, and brightened/dimmed either by an X10 controller or by external momentary action switches connected to Terminal 2. It responds to "standard" X10 commands. ie. All-Lights-On, All-Units-Off, On, Off, Bright and Dim. It also responds to extended X10 commands. Combined with the memory dim feature, the LD10 can change the room lighting instantly or progressively. This unit is especially designed for scene lighting where very often the lighting is mains powered 12V halogen, commonly used in living room, study/reading rooms. The unit can be installed in sub-junction boxes for discrete control.

Applications

This Marmitek unit can control branch lighting under X10 control or, if momentary switches are installed, with designer style wall switches.


Specification

Availability:
In stock ready to dispatch

Dimensions

Dimensions: Length 50, Width 80, Height 65 mm.

SupplyVoltage

Supply voltage: 230V +10%/-15% 50Hz
Supply current: =< 20mA capacitive
Making capacity: 60W to 700W (incandescent lamps only)
Regulating time: 3.5s +- 0.2s from full On to Off
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 and EN60065
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: => 60 Ohms (L-N) at 120KHz
Fuse: 2.5A(T)
Connections: Screw type terminals for phase, neutral,
switched phase, control 2
Ambient temperature: -10C to +50C (operation); -20C to +70C (storage)
This product is CE approved for use in the EU.


How to Install

Availability:
In stock ready to dispatch

SWITCH OFF APPROPRIATE MAINS FUSE AND MASTER SWITCH! (INSTALLATION BY A CERTIFIED INSTALLER)

1. Mount the LD11 using the schematics below.
2. Set the rotary code switches on the front side to the desired address.

Marmitek LD11 instruction diagram

When mounting more LD11 dimmers next to each other, depending on the load per LD11, keep an extra distance of 2 cm between each LD11 to ensure the heat dissipation. With the help of additional momentary switches on input 2, the module can be switched on or off by a short key press and can be dimmed by a long key press.


Reviews

There are currently no reviews for this product.
Why not be the first to write one?

If you have any questions about this product, please click here
Price:  25.52  inc. VAT
Availability:  In stock ready to dispatch
Quantity: 
Reviews

2 Pin European Adapter Plug

Marmitek X10 Two-way PLC Interface (XM10 TTL/CMOS Interface)

Motion Sensor PIR Light Switch (180 Deg.)

F Type Socket to Phono Plug Adaptor

Marmitek X10 SC9000 Telephone Dialler with Digimax Support

Stereo Phono and Video Wall Plate
My Basket
0 items
My Account
Log In
Manufacturer
Other products
Live Support

Secure Site
UK Automation is fully secured by GeoTrust QuickSSL
Card payments via SagePay Visa Mastercard Delta Maestro Solo Electron Verified by Visa Mastercard Secure