Loading... Please wait...


Our Newsletter

Marmitek Two Load Appliance Micro Module AMM32

AMM32 / 08066
Calculated at checkout

The Marmitek MicroModule AMM31 is an extremely small Marmitek X-10 appliance module which can be fitted behind any installed switch or outlet and is capable of controlling 2 different loads. The lights and appliances connected to the MicroModule can be controlled by X10 signals or you will be able to control it using a standard latching switch. The MicroModule uses one-way X-10 communication.

This module requires a neutral feed to it!


  • Switch module to turn 230V appliances, halogen and tube lights, etc. on or off.
  • Can be used in combination with ‘designer’ switches. 
  • Operation of the unit with X-10 Commands takes place via the mains wires, which means no extra wiring is necessary.
  • Controllable from a distance with X-10 commands On/Off.
  • Makes your X-10 system invisible.
  • Transforms your existing switch into a X-10 controllable switch.
  • Remote and local control On and Off.
  • Can also be used with low-energy lamps.
  • Quick and easy to install and program.
  • Can control 2 different loads and can be used behind a double or 2 gang switch

Product Manual

Click here to view the product manual

Technical Data

Supply voltage: 230VAC +10% -10% 50 Hz
Power Consumption: < 1W
Making capacity: 1800W for resistive (ohm) load
  300W for inductive/capacitive load
  1100W for light bulbs and halogen lighting
 No. of controllable loads:  2
 Dimmable:  No
 Signal sensitivity:  better than 25 mVpp at 120 kHz
 Responds to X-10 Key codes:  All units Off, All Lights On, On, Off
 Ability to enable/disable X-10 All Lights ON:  Yes
 Input switch:  Double 1- way standard rocker switch
 Silent relays:  Yes
 Control lines  Not more than 1 meter between the
 micro module and the switch
 Ambient temperature:  -10°C tot +50°C (Operation)
 Dimensions:  43.25mm x 47mm x 18.9mm

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Very good for the money

    Posted by Gavin Goodman on 16th Mar 2012

    Firstly, the instruction manual isn't the best for this module - perhaps because it's relatively new to the market. To program it:-

    In AHP go to Appliances and select the Universal Appliance Module (UAM) and drag it to the room. Give it the desired house/unit code. Repeat this for the second module.

    Now push the program button on the AMM32 until the led goes on on the module.

    Now switch the first module ON in AHP and the second module ON in AHP. The led on the module goes out and the AMM32 is programmed.

    It's a simple as that.

    The unit is a bit bulky so make sure the back box is deep enough. However you can easily extend the control wires to the switch (for manual control) which I had to do. I use mine to switch on/off my central heating & hot water and with the addition of free software (on top of the activehome pro) you can easily control things via your android or iphone smartphone.

Marmitek Two Load Appliance Micro Module AMM32 Product Discussion

Our product discussion box is a great way for you to view other peoples' feedback about products on UK Automation, and add your own.

Add to Wish List

Click the button below to add the Marmitek Two Load Appliance Micro Module AMM32 to your wish list.

Why buy from us?

Delivered from stock held in our UK warehouse

We hold a large stock of items in our UK warehouse, so no waiting extra time for deliveries from outside the UK

Great customer service

Direct telephone support (no call centres, speak directly to us) during office hours, and email support quite often out of hours too!

30 day money back guarantee

All products are covered by our 30 day money back guarantee. If you're not happy, return the goods to us in the condition you received them for a full refund.

Free 'super saver' delivery

Not in a hurry? Our super saver delivery option gives you free delivery within 5 - 7 days (although many customers receive their items much quicker!)

You Recently Viewed...