X10 Bedroom Timer - LED Display - MT10
MT10 is an X10 timer and clock all-in-one, allowing you to turn on/off your X10 devices on a schedule.
We also have the more modern MT12 timer, which is LCD based rather than LED based.
The MT10E Mini Timer can be used to turn Marmitek X-10 Modules on or off at a pre-programmed time. Up to 4 modules can be pre-programmed with 2 "On" times and 2 "Off" times.
The buttons can be used to manually control 8 modules. These modules can be controlled using the X-10 Commands "On", "Off" and "Dim". The MT10 also has buttons for "All Lights On" and "All Units Off".
The mini timer has a ‘Security’ button, which randomly adjusts the pre-programmed times for the modules every day (up to 1 hour difference). If the lighting in the house is controlled using this method, the house always looks lived-in. The modules are controlled via the mains. No extra wiring required.
The mini timer also has an adjustable alarm clock, which can switch on a module. This means the lights can be switched on when the alarm goes off.
The ‘Sleep’ function turns the modules on or off at a specific time. This time can be adjusted in increments of 15 minutes.
The mini timer is powered via the mains. A back-up battery will retain the time and settings in case of a power failure.
Supply voltage: 230V ±10% 50 Hz
Battery: 9V 6LR61
EMC emission: according to EN 50065-1
EMC immunity: according to EN 50082-1
Electrical safety: according to EN 60950 and EN 60065
120 kHz ± 2 kHz / 2,5 Vpk-pk
- 10° C to + 50° C (operation) - 20° C to + 70° C (storage)
Dimensions: 136 x 53 x 85 mm (width x height x depth )