Appliance modules switch on/off devices that require a large current such as appliances or fluorescent/energy saving lamps.
Lamp modules can switch on/off and dim/brighten incandescent lamps.
Transceiver modules receive RF signals from X10 remote controls or sensors and send them on to the devices such as the appliance module.

Available Products

Marmitek X10 Transceiver Module - All House Version

The Marmitek TM13 Transceiver converts RF wireless signals to the X10 Protocol on the mains, so that X10 modules can be controlled. The TM13 Transceiver Module is the central receiver necessary when using X10 Remote Controls, Wireless Switches and Wireless Sensors.

    Click for more details

Marmitek X10 Appliance Module AM12U

The Marmitek AM12U appliance module allows you to switch devices on and off via X10 commands.

    Click for more details

Marmitek X10 Bayonet Lamp Module LM15EB

The Marmitek LM15EB lamp module fits into a standard bayonet lamp holder. Provides ON and OFF functions and responds to ALL-LIGHTS-ON and ALL-UNITS-OFF X-10 commands.

    Click for more details

Marmitek X10 Lamp Module LM12U

X10 Lamp Module (LM12U) is a 300W receiver unit that works as a remote dimmer using standard X10 commands. The X10 Lamp Module (LM12U) responds to All-Lights-On, All-Units-Off, On, Off, Bright and Dim.

    Click for more details

X10 Appliance Module - 2G

The X10 Appliance Module (2G) is a 2nd Generation X10 Appliance Module which offers high signal sensitivity, large current switching and electronic code setting. These are the latest X10 modules from China.

    Click for more details

X10 Lamp Module - 2G

Latest 2nd generation X10 Lamp Module with built in noise filter and improved signal sensitivity. The unit responds to standard X10 commands. ie. All-lights-Off, On and Off, Dim and Bright

    Click for more details

Marmitek X10 Screw-in Lamp Module LM15ES

The Marmitek screw in Lamp LM15ES module which fits into a standard ES lamp holder. Provides ON and OFF functions and responds to ALL-LIGHTS-ON and ALL-UNITS-OFF X-10 commands.

    Click for more details

X10 RF Receiver - 2G

When used in conjunction with an X10 Remote Control or X10 Motion Detector, the RF Receiver converts signals from these devices to the X-10 Protocol on the mains.

    Click for more details

Marmitek X10 UK Plug-in Filter

The Marmitek X10 UK Plug-in Filter, use this module in between 'noisy' electrical items and your wall socket to reduce the amount of signal noise that is fed into the powerline and improve the reliability of your X10 setup.

    Click for more details