- Home
- Home Automation
- Z-Wave Automation
- Z-Wave Controllers
- Z-Wave Remote Controls
- Z Wave 4 Button Key Chain Remote Control
Product Description
Description
The Z Wave 4 Button Key Chain Remote Control is a handy convenient sized controller which allows you to control individual Z-wave devices or to initiate more complex events on your primary Z-wave controller. The key chain remote as the name suggests, comfortably fits in your pocket and has a protective slider which stops accidental activation whilst there. Although it is controlling other devices the Key fob can’t act as a Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network.
Capabilities
- Separate buttons
Each button of the pair works with it's own group. Association group 1 is controlled by button 1, group 2 by button 3, group 3 by button 2, group 4 by button 4. Single Click = On, Double Click = Off, Hold = Dim up, Click and Hold = Dim down - Buttons are grouped
Button 1 Single Click = On, Hold = Dim up, Button 3 Single Click = Off, Hold = Dim down. Only association group 1 is controlled. This applies too for buttons 2 + 4 and group 3. - Buttons are grouped with double click
Button 1 Single Click = On, Hold = Dim up, Button 3 Single Click = Off, Hold = Dim down for group 1. Button 1 Double Click = On, Click and Hold = Dim up, Button 3 Double Click = Off, Click and Hold = Dim down for group 2. This applies too for buttons 2 + 4 and groups 3 and 4.
Uses
- Control dimmers, blinds and switches
Basic and Multilevel Switch commands are sent to appropriate association group. - Control switches
Only Basic command are sent to appropriate association group. On and Off commands are sent instead of dimming commands - Switch All On/Off
Switch All commands are sent in broadcast mode to all neighbors. (Content of association group is not used) - Scene Activation in IP Gateway
Button events are sent using Scene Activation commands. Clicking a button activates a corresponding scene (see table below) in associated devices (usually an IP gateway). - Direct Activation of preconfigured Scenes
Control associated devices using Scene Activation commands configured by Scene Controller Configuration command class. - Direct Control of Devices in proximity
Control devices in short distance (50...100 cm) from the fob. Basic and Multilevel Switch commands are sent. (Content of association group is not used)
Product Manual
Download the manual for the Z Wave 4 Button Key Chain Remote Control Click here