Loading... Please wait...


Our Newsletter

Marmitek X10 Transceiver Module All House Version TM13U

  • Marmitek X10 Transceiver Module - All House Version
Calculated at checkout


  • Converts radio signals from Remote Controls, Wireless Switches and Wireless Sensors to X-10 Powerline signals over the mains.
  • Comes with a built-in Appliance Module (220V, 5A).
  • Status reading with CM11 Computer interface

You may also me interested in the trailing lead version of this product Click here for details



The Marmitek TM13 Transceiver Module is the central receiver necessary when using Remote Controls, Wireless Switches and Wireless Sensors. The TM13 Transceiver converts the signals from these devices to the X-10 Protocol on the mains, so that all X-10 Modules can be controlled via the mains.

The Transceiver Module contains a selector switch for the House Code. The HouseCode of the TM13, the modules and remote controls have to be set to the same letter code to be able to control up to 16 X-10 modules.

Position “P” will transmit all house codes

The built-in Appliance Module can be switched with a command via a wireless controller, such as a Handheld Remote Control, or via the mains using the X-10 protocol. The built-in Appliance Module always responds to Unit Code 1.When the Transceiver Module is combined with the CM11 Computer interface, the TM13 functions as a ‘gateway’ to transmit signals from remote controls and other devices to the CM11.

Using the TM13, any macros stored in the CM11 Computer Interface can be activated using a wireless remote control and all X-10 addresses can be controlled (max. 256 modules).
The Transceiver Module has a plug and switched socket and can be connected without extra wiring.

Reading the status of the TM13 is possible with the use of the CM11 Computer Interface.


Technical Specifications


Power: 230V +10% -15%, 50Hz
Supply current: <20mA capacitive
Switching capacity:
#300W/230V for light bulbs
#Low-voltage halogen lamps with a 500W/230V transformer for inductive / capacitive loads
#1200 W/230V for linear loads
RF Receiver Frequency: 433.92MHz
Marmitek X-10 Power Line: 120kHz +/-2kHz, 3.5Vpp
Signal Sensitivity: 15mVpp min., 50mVpp max. at 120kHz
Input Impedance: >180_ (L-N) at f=120kHz
Ambient Temperature: 0°C to 50°C (operating), -20°C to 70°C (storage)
Dimensions: 52x122x33mm (wxhxl excl. plug)

This product is CE approved for use in the EU.

Write your own product review

Product Reviews

Showing reviews 1-4 of 6 | Next

  1. Marmitek X10 Transceiver Module - All House Version

    Posted by Bernard Jamieson on 1st Dec 2010

    Goods were as described and in perfect working order. Great Service

  2. Marmitek X10 Transceiver Module - All House Version

    Posted by stacy conroy on 5th Aug 2010

    This module is very good, if using within the home, it has given us both freedom and instant results when we wnat it most. however, if you ahve got garden lights, it can be frustrating for the signal to reach the receiving module, due to the length of wiring on the mains, so we have purchased another tranceiver module and placed this in the garden Now all is well. This system is very reliable and not very expensive.

  3. Marmitek X10 Transceiver Module - All House Version

    Posted by Keith Lester on 22nd May 2010

    This is a very useful device and was promptly delivered.

  4. Marmitek X10 Transceiver Module - All House Version

    Posted by Chris Burwell on 10th Sep 2008

    Overall I am not very impressed with the TM13U as reception seems very flakey in Homeseer. Sometimes signals from the MS13 motion sensor are picked up and sometimes they arent. I bought this product to receive on commands from the motion sensors for the hall lighting through the night but unfortunately it is not reliable enough to be fit for purpose.

    I will be investing in a RFXCom reciever instead which are apparently much more reliable.

Showing reviews 1-4 of 6 | Next

Marmitek X10 Transceiver Module All House Version TM13U Product Discussion

Our product discussion box is a great way for you to view other peoples' feedback about products on UK Automation, and add your own.

Add to Wish List

Click the button below to add the Marmitek X10 Transceiver Module All House Version TM13U to your wish list.

Why buy from us?

Delivered from stock held in our UK warehouse

We hold a large stock of items in our UK warehouse, so no waiting extra time for deliveries from outside the UK

Great customer service

Direct telephone support (no call centres, speak directly to us) during office hours, and email support quite often out of hours too!

30 day money back guarantee

All products are covered by our 30 day money back guarantee. If you're not happy, return the goods to us in the condition you received them for a full refund.

Free 'super saver' delivery

Not in a hurry? Our super saver delivery option gives you free delivery within 5 - 7 days (although many customers receive their items much quicker!)

You Recently Viewed...