Marmitek X10 Transceiver Module All House Version TM13EFL
- Converts radio signals from Remote Controls, Wireless Switches and Wireless Sensors to X-10 Powerline signals over the mains.
- Comes with trailing lead and wall bracket for discrete mounting
The Marmitek TM13 Transceiver Module is the central receiver necessary when using Remote Controls, Wireless Switches and Wireless Sensors. The TM13 Transceiver converts the signals from these devices to the X-10 Protocol on the mains, so that all X-10 Modules can be controlled via the mains.
The Transceiver Module contains a selector switch for the House Code. The HouseCode of the TM13, the modules and remote controls have to be set to the same letter code to be able to control up to 16 X-10 modules.
Position “P” will transmit all house codes
The TM13EFL comes with a short length of cable fitted with an european plug. You can change this for a UK plug or select the adaptor plug option.
Power: 230V +10% -15%, 50Hz
Supply current: <20mA capacitive
RF Receiver Frequency: 433.92MHz
Marmitek X-10 Power Line: 120kHz +/-2kHz, 3.5Vpp
Signal Sensitivity: 15mVpp min., 50mVpp max. at 120kHz
Input Impedance: >180_ (L-N) at f=120kHz
Ambient Temperature: 0°C to 50°C (operating), -20°C to 70°C (storage)
Dimensions: 52x122x33mm (wxhxl excl. plug)
This product is CE approved for use in the EU.
Posted by Unknown on 19th Oct 2016
Works fine but antenna is brittle and stiff and in both units i purchased arrived broken. Replied with photo to a welcome email I received about this but didn't hear back.
I cellotaped it back and it still works as its the wire inside that matters rather then the plaster sleeve.