Z Wave Door and Window Sensor
This sensor will provide you with information whether a door or window is open or closed. This product consists of both a main unit and a magnetic element. One part of the sensor is mounted on the moving part of the door or window and the other part is attached to the frame. The sensor can be installed using screws or double sided tape.
The HSM02 is powered by battery which stays in a sleeping state until an action is detected. After programming the device with a set sleeping time, the device will wake up and send a status update. It will then go back to sleeping mode. Batteries can be charged without removing the device from the door or frame. When the batteries need to be replaced the device will give you a visual warning which will then send a warning to the z-wave controller. The units send information to a controller or any other associated Z-Wave device and up to 4 devices can be controlled from this device.
You will need to use a remote control or any other Z-Wave controller to enable the device to be included into a Z-Wave network. A static controller such as a PC with home automation software or a gateway is required to configure certain behaviour.
- Wireless behaviour: transmitter
- Z-Wave type: slave
- Distance: up to 30 m in buildings
- Display: LED
- Local interaction: one button for inclusion, wakeup and exclusion
- Power supply: 2 * CR2450 batteries
- Dimensions: 70 x 11.5 x 44 mm
- Weight: 50 gr. / color white