Z-Wave Smoke Detector with Mains Power Option - Popp
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 3 or above and get 5% off
There are a lot of potential fire sources in your own four walls, for example open firex such as candles or a fireplace. Also an iron, cooking utensils or numerous other electrical devices can cause fire. Smoke detectors can save lives. In case of a fire or smoke emission every second counts giving the chance to extinguish the fire or to get somebody or themselves out of harm's way.
Thanks to Z-Wave wireless technology you can define further actions triggered by the smart home control center in case of an alarm. To enhance safety, escape routes can be highlighted with automated lighting and unlocking or locking of shutters and doors.
In case smoke is detected by the smoke detector the device will sound, the red LED will blink and the wireless module will issue a Z-Wave alarm command to the main controller and other associated devices. A low battery will be indicated on short siren noise plus the Z-Wave controller will be informed using Battery Low warning commands.
Linked Smoke Alarms
The POPP smoke detector detects a resulting fire and smoke emission. In case of emergency it alarms acoustically and sends the alarm signal to all other POPP smoke detectors in range. That ensures that the alarm reaches people in all floors of the building as well as ensuring a loud siren noise across the entire property.
Independent Siren Function
Beyond these functions, the Z-Wave smoke detector can be used as an independent indoor siren which can be integrated into an existing security system. Within your Z-Wave smart home network the smoke detector can be connected to other sensors such as door and window contacts or motion sensors independently from a control center. In case of a trigger, the acoustic signal will be different from the signal in the case of fire.
Mains Power Option
Add on the POPP AC/DC adapter to provide mains power for the smoke alarm. When running in mains power mode, the battery will be used as a backup power source in the event of power failure.
- 2-in-1 smoke detector with indoor siren
- Detects smoke and fire
- Automatic meshing between all POPP smoke sensors (POPE004001) in range
- Independent use without Z-Wave control center - but adds smart functionality if you have one
- Easy installation
- Automatic self-calibration and self-test
- Additional function as independent Z-Wave indoor siren (e.g. burglary or flood alarm)
- Power Supply: Mains power (with optional available mains adapter) or battery
- Wireless Technology: Z-Wave Plus
- Dimensions: 106 x 106 x 35 mm
Click here to view the manual for this product - opens in new window