Z-Wave - DIN Rail Dimmer Module by Qubino
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 5 - 10 and get 5% off
- Buy 11 or above and get 10% off
At last, a DIN mounted Z-Wave dimmer! The Qubino DIN Rail module allows you to control lighting and fans remotely using your Z-Wave network or through wall switches connected to the DIN module.
Like most Qubino modules it also supports the connection of a digital temperature sensor, and it measures the power consumption of your connected devices and reports this back to your Z-Wave gateway.
Low power use
The Qubino DIN Dimmer module has an extremely low power consumption of just 0.7 W.
Flexible and powerful
The Qubino DIN Dimmer module can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of an additional digital temperature sensor, allowing you to add thermostatic monitoring/switching without having to buy any additional devices. Every module also act as a repeater in order to improve the range and stability of your Z-Wave network.
Qubino's fantastic tech support as standard
We know that when you need information you need it quickly. That is why Qubino offer a live customer service helpline, where you can get instant answers to all your questions and best of all, it's absolutely free.
|Power supply||110 - 230 VAC ± 10%
50 / 60 Hz*, (24–30 VDC)
|Rated load current of AC output||0.85 A / 230 VAC|
|Rated load current of DC output||0.85 A / 30 VDC|
|Output circuit power of AC output (resistive load)**||200 W (230 VAC)|
|Output circuit power of DC output (resistive load)||21 W (24 VDC)|
|Power measurement accuracy||+/-2 W|
|Digital temperature sensor range
(sensor must be ordered separately)
|-50° ~ +125°C|
|Operation temperature||-10° ~ +40°C|
|Distance||up to 30 m indoors
(depending on building materials)
|Dimensions (WxHxD)||18 x 93 x 58 mm|
|(packaging)||(21 x 95 x 64 mm)|
|Weight (including packaging)||50 g (56 g)|
|Electricity consumption||0.7 W|
|Switching||MOSFET (trailing edge)|
*depending on order code
**max 100 W mono-phase asynchronous fan motor can be connected to DIN Dimmer output.