|Power supply:||100-240 V~ 50/60 Hz|
|Power consumption:||< 1.3W|
|Dimensions (L x W x H):||42.5 x 38.25 x 20.3 mm|
|For installation in boxes:||Ø ≥ 50mm|
|Device temperature protection:||105°C|
|Overcurrent protection:||required external 10A circuit breaker|
|Active element:||semiconductor electronic switch ε|
|Device control:||remotely – radio waves
directly – external switch
|Radio signal power:||up to 1mW|
|Radio frequency:||868.4, 869.85 MHz EU;|
|Range:||up to 50 m outdoors
up to 30 m indoors
(depending on building materials)
|Comply with EU directives:||RED 2014/53/EU
Z Wave Dimmer 2 Module by Fibaro
This is the latest version 2 of the Z-Wave dimming micro module from Fibaro - the Fibaro Dimmer 2. It's designed to conveniently fit behind an existing light switch and can cope with 2 or 3 wire systems along with latching or momentary switches. Control of the module can be done either locally from the switch or via Z-Wave using a controller and App.
The Dimmer 2 is widely supported by popular controllers such as Samsung SmartThings, Fibaro Home Center 2 / Lite, Vera, Zipato, Devolo, Z-Way, OpenHAB and many more as it presents as a standard Z-Wave dimming module.
- Automatic Detection of a light source through advanced internal calibration
- Power Metering
- Compatible with 2 and 3 wire electrical systems
- Supports both leading and trailing edge
- Uses the newest generation & powerful 500 Z-Wave Chip
- Can control a maximum of 250w
If dimming very low loads such as a single LED bulb, you may need to add a Dimmer Bypass to stop the LED load from flickering. These can be wired in at any time, so we recommend purchasing them if you have a problem as many LED loads work fine without the Bypass.
To view the Fibaro brochure for the Dimmer 2 Click here
They just work
Posted by James, Hove on 14th Aug 2018
Got a load of these for lights in a new build (35 of them!!)
They have a tonne of local config options.
I'm using them with the Smartthings V2 hub, and performance was patchy to start with, but I suspect there have been some recent updates to the hub and it's all great now.
Posted by Unknown on 18th Sep 2017
Well pleased with this module, feature packed and so configureable, have installed in a three way switch circuit, works like a dream, will be buying more.
Brilliant Z-Wave Dimmer
Posted by Rahisha on 26th Feb 2017
Paired 3 of these with Hamilton Linea Duo CFX 3-position retractive switches. They work brilliantly! The ordering process from UK Automation was smooth and I received my parcel the very next day!