Z-Wave Single Paddle Wall Switch - TKB Home TZ56S
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 4 - 7 and get 5% off
- Buy 8 - 11 and get 10% off
- Buy 12 or above and get 15% off
This stylish switch from TKBHome is a relay based switch, designed to turn on/off connected loads. Ideal for use with high wattage lighting, or LED bulbs which can be problematic with dimmers, this switch will control loads of up to 6 Amps (1380 watts)
The switch is designed to be a direct replacement for an existing light switch and is a simple way to add Z-Wave control to your lighting circuits.
The switch is equipped with a neat LED indicator to help you locate it in a dark room (can be turned off via Z-Wave parameters)
The key thing to note, for UK consumers, is that this switch requires a neutral at the switch (3 wire system) which is less common in older UK wiring set-ups. If in doubt, please check with an electrician before purchasing.
The switch has the latest Z-Wave Plus chip, meaning it improves communication with your other Z-Wave devices and as it's a mains powered device it will act as a Z-Wave repeater to strengthen your network.
This switch should work with all major Z-Wave gateways and controllers. TKBHome have verified support for:
Fibaro Home Center 2 / Lite
Vera Edge / Plus
Radio: Z-Wave Plus (868.42MHz - EU)
Maximum load: 1380 watts (6 Amps)
Voltage: 230V, 50Hz
Operating Temperature: 0C - 40C
Wiring: 3-wire system, Neutral required
Range: up to 30m (indoors)
Dimensions (LxWxH): 86 x 86 x 47mm (24mm mounting depth minimum)
Display: Blue LED
Click here to view the manual for this product in PDF format - Opens in new window