X10 Handheld RF Remote Control

Features

• Allows control of up to 16 devices
• Sends wireless RF signals to a transceiver module (TM13) or to any X10 wireless 433 MHz receiver
• Compatible with a full range of X10 home automation products operating at 433 MHz

The HR10U / HR12U lets you control up to 16 X10 modules (lights and appliances) remotely from anywhere inside or outside your home, subject to standard RF range constraints. This remote control has a longer range than the keyfob remote and works up to approx. 25 meters away in clear air.

You can turn on and off appliances and also brighten and dim lights connected to an X10 module set to the same house code as the HR10U. A slide switch allows you to control modules set to house code 1 through 8 and 9 through 16.

The HR10U / HR12U is normally used with a TM13 transceiver module which passes all codes from wireless transmitters on the same house code onto the powerline to control X10 modules. Please see below for more details.

Typical Applications

• Control lights or appliance from anywhere inside or outside your house - in the garden or the car
• Attach the wireless remote control to the wall inside a doorway(using Velcro) so you can turn on lights as you enter the room
• Keep one by the bedside so you can turn on lights from the comfort of your bed
• Add additional remote controls - leave one in the house and have one in the car
• Disabled persons would find it convenient to use from a wheelchair

Technical Specification

This product is CE approved for use in the EU

Supply Voltage - Batteries: 4 x AAARF
RF Frequency: 433 MHz
Radiated Output: <5833 µV/M @ 3mRF
Operating range: 30m (open field)
Approvals: MPT1340 or ETS 300220, CE Approved
Ambient temperature: -10ºC to +40ºC (operation) or -20ºC to +70ºC (storage)