- Home
- Home Automation
- X10 Home Automation
- X10 Plug in Modules
- X10 Appliance Module AM12AU - Australian plug
Product Description
Features
- On/Off function to control an energy saving light, heater, fan, coffee maker, etc.
- Designed to operate with 230V AC loads of up to 500W (incandescent lamps and halogen light) or 230W (motors) or 3600W (resistive loads)
- Australian Plug Fitting
The AM12AU appliance module is an X10 receiver unit that works as a remote controlled switch or relay. You can plug it into any plug socket in the house and control the unit attached to it via X10 commands.
Details
The appliance module can switch incandescent lamps up to 500W, appliances with electric motors up to 230W.
As the X-10 switch is simply inserted into wall sockets like an ordinary plug, there is no installation to be carried out. Just set the wheels on the front to the desired device address (eg. G7) and note this address down.
Dimensions
Dimensions: Length 122, Width 52, Height 44 mm
This product is CE approved for use in the EU
Technical Specifications
Supply voltage: 230V +-10% 50Hz
Supply current: =< 20mA capacitive
500W (incandescent lamps and halogen light) 230W (motors) 3600W (resistive loads)
Responds to X-10 Key codes: All Units Off, On, Off
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: => 180Ohms (L-N) at 120KHz
This product is CE approved for use in the EU
Ambient temperature: -10C to +40C (operation), -20C to +70C (storage)
Product Reviews
Find Similar Products by Category
Customers also viewed
-
£27.50£19.00 -
£27.50
-
£30.00£12.00 -
£28.50£20.00 -
£25.00