Aeotec WallMote Quad - 4 Button Remote Switch
The Aeotec Wallmote Quad is a new Z-Wave Plus remote control from Aeon Labs.
The remote can act as a primary Z-Wave controller if you're not currently running a gateway such as a Fibaro Home Center or a Vera. If you are, you can use the Wallmote Quad to control scenes from your master gateway, or directly associate it with Z-Wave devices such as dimmers or LED bulbs and use the Wallmote Quad to directly control them.
The battery powered touch switch comes with a magnet that allows for easy mounting in the respective wall mount (included). Using the Wallmote in this fashion means it becomes a wall switch. You also can take the device out of it's holder and use it as a portable remote control.
Included is a USB->Micro USB cable to allow for charging of the built-in battery from a PC, smartphone charger or any other device with a USB port.
- Remote switch with a 4 button touch-surface
- Z-Wave Plus
- EU frequency: 868,42 MHz
- Vibration feedback when operating
- Slider function
- Integrated colour LED indicates status
- Contents of package: touch remote switch, wall holder, mounting materials
Simple to install.
WallMote is the wall switch for anywhere because of it is simple to install. Mounting it requires just two steps.
WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.
WallMote is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.
WallMote does not just offer control on tap. Each button is touch sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.
Press and hold. Swipe up. Swipe down. Tap. Through capacitive touch, each of these lets WallMote do something different. Dim lights on a whim. Open curtains to let in a little bit more light. Through the power of touch, WallMote does not just offer whole home control, it offers precise control on demand.