Site Information

 Loading... Please wait...

Dual Relay Switch (2 x 1.5Kw)- Double Switch 2 by Fibaro

£48.00
5 Stars 1 product review
SKU:
FGS-223
Shipping:
Calculated at checkout
Current Stock:
Out of stock

Out of Stock

Product Description

Double Switch 2 by Fibaro is designed to be placed into a pattress box behind a normal switch and is capable of switching 2 independent loads of up to 1.5Kw each (total load of no more than 10A per module). The wall switch is no longer controlling the electrical loads directly but acts as input device for the micro module, allowing you to switch the load via both Z-Wave control and local switch control. It has a pair of internal relays to control the electrical loads attached. With this micro module an existing installation can be turned into a Z-Wave enabled smart system keeping the original switches in place. This is particularly useful if you are using switches of a particular pattern and don't what to change them.

However you do need a deep pattress box to accommodate the insert and the traditional switch.  The insert is 20.3mm wide so this is the minimum extra depth required behind the switch to install the product.
 
This product is a direct replacement for the FGS222 module, and brings Z-Wave Plus functionality - meaning you will have a stronger Z-Wave network. It also features power monitoring, so the consumed load will be reported by compatible gateways. Finally, the product can have it's firmware upgraded over the air (from a compatible Z-Wave gateway)

NOTE: This module requires a neutral feed into the switch.

Technical Specification

  • Power Supply:  110 - 230 V AC ±10% 50/60Hz
  • Rated load current for AC output: 6.5A per channel - 10A total load across both channels
  • Scene management: 1 to 3 presses and holding the key pressed down can be mapped to four different actions
  • System of control for each channel: Standard control, Delayed device activation, Delayed device deactivation, Auto on and auto off mode with additional options
  • Operational temperature: 0 - 35 °C
  • Radio protocol: Z-Wave+
  • Radio Frequency 868 MHz
  • Range: up to 50 m outdoors or up to 40 m indoors (depending on building materials)
  • Outside dimensions (L x W x H) 42.5mm x 38.25mm x 20.3mm.
  • Electricity consumption: < 0,8W

Product Reviews

Write Review

  1. Just Works! 5 Star Review

    Posted by on 14th Aug 2018

    Got 8 of these to control some lights where I didn't need dimming. They just work.
    Loads of local config.
    I'm using them with the Smartthings V2 hub, and performance was patchy to start with, but I suspect there have been some recent updates to the hub and it's all great now.

Find Similar Products by Category

Trustpilot


Click the button below to add the Dual Relay Switch (2 x 1.5Kw)- Double Switch 2 by Fibaro to your wish list.