Fibaro Smart Wall Plug - EU (Schuko)
The Fibaro wall plug is a smart Z-Wave device control plug, which is neatly designed to wrap around the power cable.
Although this is an EU plug socket, it will also work fine for our UK customers as we can supply a Schuko adapter if required (simply select the option when adding to your basket).
- Compatible with any Z-Wave or Z-Wave+ Controller
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption
- Advanced microprocessor control.
- Executive element – relay.
- Active power and energy metering functionality.
- Compact and stylish casing.
- Easy installation – just plug in.
Sophisticated, but simple
The Fibaro wall plug includes built in power monitoring, meaning it will report the usage of the connected device back to your Fibaro Home Center or other z-wave gateway.
The colour changing crystal ring around the plug glows to show the load of the connected socket, ranging from light blue (0W) through green (200W), orange (1000W), red (1800W) to purple (2500W).
Built-in network range tester
The Fibaro Wall Plug can provide a signal strength indicator for your Z-Wave network.
Start the process by pressing the button on the plug’s casing for a few seconds. The LED will show a purple light to inform you that the plug is in testing mode. You can then see the current network coverage by color displayed.
If the plug glows green, it's in direct communication range of your Z-Wave gateway.
If it glows yellow, it's routing via another Z-Wave node to reach the gateway.
If it glows red, it's out of range and needs to be moved closer to the gateway (or another Z-Wave powered device should be installed in a mid-point between this device and the gateway)
The smallest Z-Wave wall socket of it's kind
Fibaro Wall Plug is the smallest and most attractive device of this type available in the world. Its modern design perfectly fits in with any interior design.
New firmware updates can be applied to this device, when released, via the Home Center 2 or Home Center Lite.
You don’t have to disconnect it from a wall socket and waste time connecting it to computer. Just press update button and the firmware will update over the air.
Click here to view the manual for this product (Link opens in a new window)
Power Supply: 230V AC, 50/60 Hz
Rated load current (for resistive load): 11A - continuous load
Power consumption: up to 1.6W
Power output (for resistive load): 2.5kW at continuous load
Radio protocol: Z-Wave (500 series chip)
Radio frequency: 868.4 Mhz (EU)
Range: up to 50m outdoors, up to 40m indoors (depending on terrain and building structure)
Operating temperature: 0 - 40°C
Dimensions (Diameter x Height): 43 x 65 mm
Safety classification rating: home and office use only
Type 1 action according to features of automatic action as per clause 6.4.1 of EN 60730-1:2012 standard. Software class A device, according to EN 60730-1:2012 standard.