Roller Shutter 2 by Fibaro (Blind control)
The Z-Wave Roller Shutter 2 by Fibaro is designed to fit in a switch box and provide Z-Wave control for suitable blinds, shutters, curtains, etc., It can be connected to a normal switch or a momentary switch to still provide you with local control over your blinds etc. Once included into your network it can be controlled by any compatible Z-wave controller to provide you with remote control.
Fibaro Roller Shutter is a universal, Z-Wave compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches. The module may be controlled wirelessly, through the Z-Wave network main controller, or through the switch keys connected to it. It’s also possible to combine few devices into groups of devices, which then can be controlled simultaneously. In addition, Fibaro Roller Shutter is equipped with Power Metering.
|110 - 230 V ±10% 50/60Hz
|Power of supplied motor
|up to 1kW @ 230VAC
|0 - 40 °C
|For installation in boxes
|Ø ≥ 50mm
|up to 50 m outdoors
up to 30 m indoors
(depending on building materials)
|Dimensions (H x W x D)
|17 x 42 x 37 mm
The manual for the Z Wave Blind Control Micro Module by Fibaro can be downloaded here